ART = 98101

H of W/T Hss Square End Scraper 1" -Unhandled

Treated High Speed Steel Tool.
By Lowering the Temerature of Steel Under Highly Controlled Conditions to -180 Degrees and soaking at this temerature for up to 3 days, the metalurgical structure of the steel is altered. The resulting tool has increased wear resistance wear resistance and will hold a cutting edge by 2 to 3 times as longer than standard. Tools are not brittle and can be sharpened as normal.

Made form flat rectangular bar heavier than oval section for turning on legs,posts etc.


HCT 100
1/2
Standard Skew Chisel
10
HCT101
3/4
Standard Skew Chisel
10
HCT102
1
Standard Skew Chisel
10
HCT103
1.1/4
Standard Skew Chisel
14
ART = 98102

Roughing Gouge
High Speed steel resists'Blued' Softening from overheating
sharpened edge lasts 6 times longer than carbon steel
fingernail medium grind
Overall Length 16-1/2"
Ash Handle

HCT063
1/2
Roughing Gouge
10
HCT064
3/4
Roughing Gouge
10
HCT065
1.1/4
Roughing Gouge
14
HCT066
1.3/4
Roughing Gouge
16
ART = 98103

H of W/T Hss Round Nose Scraper  3/4' - Unhandled
Treated High Speed Steel Tool.
By Lowering the Temperature of steel under highly controlled conditions to -180 Degrees and soaking at this temperature for up to 3 days, the metalurgical structure of the steel is altered. The resulting tool has increased wear resistance and will hold a cutting edge by 2 to 3 times as longer than standard .
Tool are not brittle and can be sharpened as normal.

ART = 98104

Hof W/T Hss Round Nose Side Cutting Scraper -Unhandled.
When a scraper is Ground the wheel throws up a fine burr on the top face. It is the burr which cuts the timber. The Scraper is presented either horizontally or trailing slightly downwards. A rigid tool rest is important when scraping . Unhandled Used to part the finished project off from the waste material , The parrellel sides make for a rigid tool that handles well. the 1/8' -3mm tool reduces the amount of waste. Vital if the timber is an expensive, exotic one . It also makes for a fine detailing tool, e.g . beads and fillets.
Overall Length Handle Length
1/8' -3mm 131/2"         81/2"
1/4" -6mm 17"             10"
Diamond Section
The Special profile of this tool reduces the risk of binding in the cut. it also reduces the amount of heat build up caused by friction there by lessening the chance of burning the bottom of the parted project.
831H 3/16" -5mm 17"        10"
Fluted Designed for blending the parallel side wall and the curved bottom of vassels together .It is Excellent for undercutting the rims of small bowls.
824H  3/4" -19 mm 18 1/2"          10"
These 5 tools available as box set 55HS. Will Cut perfect semi circular beads . Mose design permits multiple bead design.
1/8"-3mm
3/1-5mm
1/4" -6mm        13 1/2"              8 1/2"
5/16"-8mm
3/8"- 10mm
1/2"-13mm
5/8"-16mm
3/4" -19mm

ART   = 98105
H of W/T Hss Oval Skew Chisel 3/4" -Handled
Treated High Speed Steel Oval Skew Shisel 3/4".
By Lowering the Temperature of steel under highly controlled conditions to -180 Degrees and soaking at this temperature for up to 3 days, the metalurgical structure of the steel is altered. The resulting tool has increased wear resistance and will hold a cutting edge by 2 to 3 times as longer than standard. Tools are not brittle and can be sharpened a normal.
A Unique innovation developed to overcome many of the problems of traditonal Chisels made from rectangular section steel . Retains strength but light weight gives sensitivity for fine finishing cuts. Slides smoothly - no corners to damage tool rest .
Fitted With a 10" Ash Handle
H of W/T Hss Diamond side cutting Scraper 3/4" - Unhandled
Pepper Mill Internal Grooving Tool - Handled
This Tool Has Been Developed Especially for reproducing the 5mm groove that keeps the ceramic mill mechanism in position. the mill mechanism can be glued into the wood, but if the mills are produced in quantities this tool provides a more professional fit . Supplied Complete with handle.

ART = 98106   

H of W/T Hss Round Nose Scraper 3/4"-Unhandled
Treated High Speed Steel Tool.
By lowering the Temperature of steel under highly controlled conditions to -180
Degrees and soaing at this temperature for up to 3 days, the metalurgical structure of the steel is altered the resulting tool has increased wear resistance and will hold a cutting edge by 2 to 3 times as longer than standard.
Tools are not brittle and can be sharpened as normal.

HCT 108
3/8
Round Skew Chisel
10
HCT 109
1/2
Round Skew Chisel
10
HCT 109B
1/4
Round Skew Chisel
10
Round Skew Chisel